UGP Head Gasket Replaces Generac 0C3150, C3150A, 71987

Description

Repair a compatible Generac GN410 or GH410 engine with this Universal Generator Parts replacement cylinder-head gasket. This aftermarket gasket is designed to replace Generac part number 0C3150 and referenced earlier numbers C3150A and 71987 in confirmed applications.

The gasket installs between the cylinder head and engine block, helping seal combustion pressure and separate critical engine passages. It is not a rocker-cover or valve-cover gasket.

Product Features:

• UGP aftermarket replacement cylinder-head gasket
• Replaces Generac part number 0C3150
• Cross-references C3150A and 71987 in designated applications
• Designed for select GN410 and GH410 engines
• Helps seal combustion pressure between the head and engine block
• Suitable for cylinder-head service and engine repair
• Equipment- and engine-specific fitment

Package Includes:

• 1 UGP replacement cylinder-head gasket

Cylinder-head bolts, rocker-cover gaskets, intake gaskets, exhaust gaskets, sealant, and other engine components are not included.

Compatible Generator Families:

• XG7000
• XG7000E
• XG8000
• XG8000E

Listed Generator Models:

XG7000E-5798-0, XG7000-5797-0, XG8000-5800-0, XG8000E-5747-0, XG8000E-5747-1, XG8000E-5747-2, XG8000E-5747-3, 005747-0, 005747-1, 005747-2, 005747-3, 005798-0, 005800-0, 005930-1, 0052331, 0046732.

The supplied fitment information also references several Sears/Craftsman and other equipment numbers. Those applications should be individually confirmed before adding them to the published compatibility list.

Part-Number Information:

• UGP replacement number: 0C3150
• Replaces Generac: 0C3150
• Referenced earlier numbers: C3150A, 71987

A cross-reference does not guarantee fitment across every engine that uses a similar gasket. Confirm the original part through the engine parts diagram.

Product Information:

• Brand: Universal Generator Parts
• Product type: Cylinder-head gasket
• Engine application: Select GN410 and GH410 engines
• Quantity: 1 gasket
• Condition: New
• Fitment type: Engine-specific
• Classification: Aftermarket replacement part

Installation Guidance:

Cylinder-head gasket replacement is an advanced engine repair. Turn off the generator, follow the required shutdown procedure, disconnect the starting system, and allow the engine to cool before beginning work.

Inspect the cylinder head and engine-block surfaces for warping, cracks, corrosion, and other damage. Remove all old gasket material without scratching the mating surfaces. Install the replacement in the correct orientation and follow the manufacturer’s specified bolt sequence, tightening stages, and torque values.

Confirm whether the cylinder-head bolts must be replaced instead of reused. After assembly, adjust the valves if required and verify compression, engine operation, and the absence of oil or combustion leakage.

Installation by a qualified generator-engine technician is strongly recommended.