UGP Oil Filters Replace Kohler 52 050 02-S – 3 Pack

Description

UGP Oil Filters Kohler 52 050 02-S – 3-Pack Replacement Filters

Keep your compatible outdoor power equipment maintained with UGP oil filters Kohler 52 050 02-S, a three-pack of aftermarket replacement engine-oil filters from Universal Generator Parts. Designed to replace Kohler part number 52 050 02-S in select applications, these spin-on oil filters help capture debris circulating in engine oil. The extra-capacity design provides additional filter-media area compared with designated shorter filters.

Each filter includes an anti-drainback valve and a pressure-relief valve designed to support oil retention and maintain oil flow under the specified conditions. This convenient three-pack is suitable for scheduled maintenance or keeping spare filters available when your equipment needs an oil change.

Key Features of UGP Oil Filters Kohler 52 050 02-S

• Three-filter pack: Includes three UGP aftermarket engine-oil filters.
• Replacement part number: Designed to replace Kohler 52 050 02-S in select applications.
• Extra-capacity design: Provides additional filter-media area compared with designated shorter filters.
• 27-micron filtration rating: Listed filtration rating for capturing debris in engine oil.
• Pressure-relief valve: Listed relief pressure of 8–11 PSI.
• Anti-drainback valve: Helps retain oil when the engine is off.
• Convenient multipack: Useful for planned maintenance or spare inventory.

These features make the Kohler 52 050 02-S replacement filter a practical option for compatible equipment. Always compare the specifications with your engine manufacturer’s requirements before purchasing.

Compatible Kohler Engines and Equipment

UGP oil filters Kohler 52 050 02-S are designed for select Kohler engine applications. Listed compatible engine series and models include:

Compatible Kohler Engine Series

• CH11 through CH15
• CV11 through CV22
• M18 through M20
• MV16 through MV20
• K582
• Select KT735 engines
• Select KT745 engines
• Select 15–27 HP Kohler engine applications

Additional Listed Applications

The following equipment models are also listed as applications:

• Cub Cadet LT1045
• Cub Cadet LT1050
• Cub Cadet LTX1045
• Cub Cadet LTX1050
• Husqvarna YTH21K46
• Husqvarna LGT2654
• Select Onan P218 applications

Important compatibility warning: Compatibility depends on the equipment’s engine and original filter number. Equipment model alone does not guarantee fitment. Before ordering, verify the engine model, original filter number, thread size, gasket diameter, available installation clearance, and specified relief-valve pressure. Check your owner’s manual or equipment manufacturer’s parts information if you are unsure.

Product Specifications

Review the listed specifications before selecting this aftermarket engine oil filter.

These are the listed product specifications. Confirm that the dimensions and operating specifications match your equipment before installation.

What Is Included in the 3-Pack?

Each order includes:

• 3 UGP replacement engine-oil filters designed to replace Kohler 52 050 02-S.

Engine oil, tools, drain pans, and other maintenance supplies are not included. Make sure you have the correct engine oil and any necessary maintenance supplies before starting your service.

Installation Guidance

Follow your equipment owner’s manual when replacing an engine oil filter. The following general steps help support a careful installation.

1. Turn off the engine and let it cool. Do not begin maintenance while the engine is hot.
2. Manage the engine oil. Drain or otherwise manage the oil according to the equipment owner’s manual.
3. Remove the old filter. Follow the manufacturer’s procedure and ensure the old gasket does not remain on the mounting surface.
4. Clean the mounting surface. Remove residue and check the filter mounting area.
5. Lubricate the new gasket. Apply a light coating of clean engine oil to the replacement filter’s gasket.
6. Install the replacement filter. Follow the equipment manufacturer’s tightening instructions. Do not assume a universal tightening specification.
7. Refill with the specified oil. Use the correct oil type and quantity stated in the owner’s manual.
8. Check for leaks. Start the engine according to the manufacturer’s instructions and inspect the filter area for leaks.
9. Recheck the oil level. Shut off the engine and check the level using the procedure in the owner’s manual.
10. Dispose of used materials properly. Follow local regulations for used engine oil and filters.

Before installation, confirm the engine model, original filter number, thread size, gasket diameter, installation clearance, and required relief-valve pressure. If any specification differs, do not install the filter until compatibility has been confirmed.

Why Choose UGP Replacement Oil Filters?

A three-pack of UGP replacement oil filters gives you three filters for compatible equipment maintenance. Instead of ordering a single filter each time, you can keep the remaining filters available for future service.

The extra-capacity design provides additional filter-media area compared with designated shorter filters. The listed 27-micron filtration rating, anti-drainback valve, and 8–11 PSI pressure-relief valve are useful specifications to compare against your engine’s requirements.

These are aftermarket replacement parts, not genuine Kohler OEM filters. Their suitability depends on the exact engine application and required filter specifications. Always verify fitment before ordering.

Frequently Asked Questions

1. Which Kohler filter does this UGP three-pack replace?

This three-pack is designed to replace Kohler oil filter part number 52 050 02-S in select applications. Confirm the original filter number and engine specifications before ordering.

2. How many filters are included, and what is the filtration rating?

The package includes three UGP aftermarket spin-on engine-oil filters. Each filter has a listed filtration rating of 27 microns, an 8–11 PSI pressure-relief valve, and an anti-drainback valve.

3. Will these oil filters fit every Cub Cadet or Husqvarna model listed?

No. The listed Cub Cadet and Husqvarna models are additional applications, but compatibility depends on the installed engine and original filter number. Equipment model alone does not guarantee fitment. Verify the thread size, gasket dimensions, clearance, and required relief pressure before purchasing.

Order Your Replacement Oil Filters

Choose UGP oil filters Kohler 52 050 02-S if you need a three-pack of aftermarket filters for a compatible engine application. Review the listed dimensions and valve specifications, verify your equipment’s requirements, and order only after confirming fitment.