UGP Maintenance Kit Replaces Generac 6840 for 5.5–8 kW Generators with 5W-30 Oil

Description

Perform routine engine service on a compatible Generac portable generator with this UGP replacement for maintenance kit 6840. Designed for select 5,500–8,000-watt generators, the kit includes an air filter, spark plug, SAE 30 engine oil, and convenient oil-change supplies.

Regular replacement of the engine oil, air filter, and spark plug can help support dependable starting, clean engine airflow, proper lubrication, and consistent generator operation.

Kit Includes:

• 1 UGP replacement air filter
• 1 replacement spark plug
• 1 one-quart bottle of 5W-30 engine oil
• 1 paper oil funnel
• 1 shop towel

An oil filter, fuel filter, tools, and other maintenance supplies are not included.

Product Features:

• UGP aftermarket replacement for Generac maintenance kit 6840
• Designed for select 5,500–8,000-watt portable generators
• Includes air-filtration, ignition, and oil-change components
• Air filter helps prevent debris from entering the engine
• Spark plug supports dependable ignition
• SAE 30 oil provides lubrication during routine service
• Convenient package for scheduled portable-generator maintenance

Compatible Generator Models:

• Generac GP5500
• Generac GP6500
• Generac GP6500E
• Generac GP7500E
• Generac GP8000E
• Generac XT8000E
• Generac RS5500
• Generac RS7000E

Compatibility may vary by model revision, engine, production date, and serial-number range.

Part-Number Information:

• Replaces Generac maintenance kit: 6840

The kit-number reference identifies the intended maintenance application. The included components are UGP aftermarket replacements rather than a complete genuine Generac OEM kit.

Product Information:

• Brand: Universal Generator Parts
• Product type: Portable-generator maintenance kit
• Generator application: Select 5.5–8 kW portable generators
• Oil type: 5W-30 engine oil
• Oil quantity: 1 quart
• Spark-plug quantity: 1
• Air-filter quantity: 1
• Condition: New
• Fitment type: Equipment-specific
• Classification: UGP aftermarket replacement components

Maintenance Guidance:

Follow the service schedule and procedures in the generator owner’s manual. Turn off the generator, disconnect all electrical loads, close the fuel valve, disconnect the spark-plug lead, and allow the engine to cool before maintenance.

Install the air filter in the correct orientation. Check the replacement spark plug’s gap before installation and tighten it to the engine manufacturer’s specified torque.

Add the SAE 30 oil gradually while monitoring the dipstick. Do not assume the engine requires the entire included quart. Confirm that straight SAE 30 oil is approved for the generator’s engine and expected operating temperatures.

After service, run the generator, inspect for oil leakage, stop the engine, and recheck the oil level. Verify the complete generator model and serial numbers before ordering.