Generac 6171 OEM Maintenance Kit for 60 kW, 2.4L Liquid-Cooled Generators

Description

Perform routine engine service on a compatible liquid-cooled standby generator with the genuine Generac 6171 Maintenance Kit. Also identified as G006171-0, this kit is designed for select 60 kW generators equipped with 2.4L engines.

The kit includes the filtration, ignition, and service components required for common scheduled-maintenance tasks. Engine oil and coolant are not included and must be purchased separately according to the generator owner’s manual.

Kit Includes:

• 1 genuine Generac air filter
• 1 genuine Generac oil filter
• 4 genuine Generac spark plugs
• 1 oil funnel
• 1 chamois cloth
• 1 preventative-maintenance reminder sticker

Engine oil, coolant, tools, and other service supplies are not included.

Product Features:

• Genuine Generac OEM maintenance kit
• Designed for select 60 kW liquid-cooled generators
• Compatible with designated 2.4L engine applications
• Includes filtration and ignition components
• Air filter supports clean engine airflow
• Oil filter helps remove contaminants from circulating oil
• Four spark plugs support dependable ignition
• Reminder sticker helps record the next service date

Compatible Generator Applications:

• Select Generac 60 kW liquid-cooled standby generators
• Select generators equipped with compatible 2.4L engines
• Units that identify G006171-0 or maintenance kit 6171 as the required service kit

Compatibility depends on the generator’s complete model, engine configuration, production date, fuel type, and serial number.

Part-Number Information:

• Maintenance-kit number: 6171
• Full Generac part number: G006171-0

Product Information:

• Brand: Generac
• Product type: Liquid-cooled generator maintenance kit
• Generator output: Select 60 kW models
• Engine application: Select 2.4L engines
• Spark-plug quantity: 4
• Engine oil included: No
• Coolant included: No
• Condition: New
• Fitment type: Equipment-specific
• Classification: Genuine OEM maintenance components

Maintenance Guidance:

Follow the exact service schedule and procedures in the generator owner’s manual. Maintenance intervals may vary according to generator model, operating hours, environmental conditions, and application.

Turn off the generator, disable automatic starting, isolate utility and generator power, disconnect the starting battery as directed, and allow the engine to cool before maintenance.

Install the air filter in the correct orientation. Clean the oil-filter mounting surface, confirm that the old gasket has been removed, lightly coat the new filter gasket with clean engine oil, and tighten the filter according to Generac’s instructions.

Check all four spark-plug gaps before installation and tighten the plugs to the specified torque. Refill the engine and cooling system with the approved oil and coolant types and quantities.

After service, run the generator, inspect the oil and cooling systems for leakage, stop the engine, and recheck all fluid levels. Verify the complete generator model and serial numbers before ordering.