Generac 5719 OEM Portable Generator Maintenance Kit for 407cc, 410cc Engines

Description

Perform routine engine service on a compatible Generac portable generator with the genuine OEM 5719 Maintenance Kit. Designed for select generators equipped with 407cc or commonly referenced 410cc engines, this kit includes filtration, ignition, and convenient service components.

The air filter helps prevent airborne debris from entering the engine, while the oil filter helps remove contaminants from circulating engine oil. The spark plug supports dependable ignition, and the included funnel, chamois, and fuel-stabilizer sample assist with routine servicing and storage preparation.

Engine oil is not included and must be purchased separately according to the viscosity and capacity specified in the generator owner’s manual.

Kit Includes:

• 1 genuine Generac air filter
• 1 genuine Generac oil filter
• 1 genuine Generac spark plug
• 1 spark-plug wrench
• 1 oil funnel
• 1 chamois cloth
• 1 fuel-stabilizer sample

Engine oil and other maintenance supplies are not included.

Product Features:

• Genuine Generac OEM portable-generator maintenance kit
• Designed for select 407cc and 410cc engine applications
• Includes air- and oil-filtration components
• Spark plug supports dependable engine ignition
• Spark-plug wrench assists with removal and installation
• Funnel helps with adding replacement engine oil
• Fuel-stabilizer sample supports storage preparation
• Convenient package for seasonal maintenance

Compatible Generator Models:

• Generac 5747
• Generac 5796
• Generac 5798
• Generac 5845
• Generac 5846
• Generac 5847
• Generac 5930
• Generac 5931
• Generac 5934
• Generac 5935

Complete model numbers may contain additional zeros, prefixes, or revision digits. Compatibility depends on the generator’s engine, production date, and serial number.

Product Information:

• Brand: Generac
• Kit number: 5719
• Product type: Portable-generator maintenance kit
• Engine application: Select 407cc and 410cc engines
• Spark-plug quantity: 1
• Engine oil included: No
• Condition: New
• Fitment type: Equipment-specific
• Classification: Genuine OEM maintenance components

Maintenance Guidance:

Generac recommends following the service schedule in the portable generator owner’s manual. Seasonal maintenance may be appropriate for some models, while more frequent service may be required after extended operation or use in dusty, hot, or otherwise demanding conditions.

Turn off the generator, disconnect all electrical loads, close the fuel valve, disconnect the spark-plug lead, and allow the engine to cool before maintenance.

Install the air filter in the correct orientation. Clean the oil-filter mounting surface, confirm that the old gasket has been removed, lightly coat the new filter gasket with clean engine oil, and tighten it according to Generac’s instructions.

Check the spark-plug gap before installation and tighten the plug to the specified torque. Add the approved oil type and quantity while monitoring the dipstick.

Use the fuel-stabilizer sample only according to its label and the generator owner’s manual. Verify the complete generator model and serial numbers before ordering.