UGP Oil Filters Replace Kohler 52 050 02-S – 2 Pack

Description

Maintain clean engine oil with this two-pack of Universal Generator Parts replacement oil filters. Each aftermarket filter is designed to replace Kohler 52 050 02-S in select generators, lawn tractors, mowers, and other outdoor power equipment.

The extra-capacity design provides additional filter-media area compared with designated shorter filters. Each filter includes an anti-drainback valve to help retain oil when the engine is off and a pressure-relief valve designed to maintain oil flow if the filter media becomes restricted.

Product Features:

• Two UGP aftermarket engine-oil filters
• Replaces Kohler part number 52 050 02-S
• Extra-capacity filter design
• 27-micron listed filtration rating
• 8–11 PSI pressure-relief valve
• Anti-drainback valve
• Helps capture debris circulating in the engine oil
• Supports clean lubrication and routine engine maintenance

Package Includes:

• 2 UGP replacement engine-oil filters

Engine oil, tools, drain pans, and other maintenance supplies are not included.

Compatible Kohler Engine Series:

• CH11 through CH15
• CV11 through CV22
• M18 through M20
• MV16 through MV20
• K582
• Select KT735 engines
• Select KT745 engines
• Select 15–27 HP Kohler engine applications

Additional Listed Applications:

• Cub Cadet LT1045
• Cub Cadet LT1050
• Cub Cadet LTX1045
• Cub Cadet LTX1050
• Husqvarna YTH21K46
• Husqvarna LGT2654
• Select Onan P218 applications

Compatibility depends on the equipment’s engine and original filter number. Equipment model alone does not guarantee fitment.

Product Specifications:

• Brand: Universal Generator Parts
• Replacement part number: Kohler 52 050 02-S
• Product type: Spin-on engine-oil filter
• Listed height: 3-1/8 inches
• Listed outside diameter: 3 inches
• Listed seal outside diameter: 2-13/16 inches
• Listed relief pressure: 8–11 PSI
• Listed filtration rating: 27 micron
• Valve type: Anti-drainback
• Quantity: 2 filters
• Condition: New
• Classification: Aftermarket replacement parts

Installation Guidance:

Turn off the engine and allow it to cool before changing the oil filter. Drain or manage the engine oil according to the equipment owner’s manual.

Clean the filter-mounting surface and confirm that the old gasket has been removed. Lightly coat the new filter gasket with clean engine oil, install the filter according to the manufacturer’s tightening instructions, and refill the engine with the specified oil and quantity.

Start the engine, inspect the filter area for leaks, shut the engine off, and recheck the oil level. Dispose of the used oil and filter according to local regulations.

Verify the engine model, original filter number, thread size, gasket diameter, available installation clearance, and specified relief-valve pressure before ordering.