UGP 0867439 Oil Filters Replace Generac 070185B, 070185D, 070185DS – 3 Pack

Description

Table of Contents

1. Why Choose the UGP 0867439 Oil Filter?
2. Key Features & Benefits
3. Replaces These Generac Part Numbers
4. Compatible Brands & Generator Models
5. Product Specifications
6. Installation & Maintenance Tips
7. Frequently Asked Questions

Why Choose the UGP 0867439 Oil Filter?

Maintain clean engine oil and protect your standby generator with the UGP 0867439 Oil Filter three-pack. These high-quality aftermarket filters are engineered to replace Generac 070185B, 070185D, and 070185DS, offering a cost-effective solution for routine generator maintenance. If you are searching for a reliable Generac 070185B oil filter 3 pack, the UGP 0867439 Oil Filter delivers dependable filtration performance for select air-cooled standby generators.

Each 75mm filter helps capture dirt, sludge, metal particles, and other contaminants circulating through your generator’s lubrication system. Regular oil and filter changes support effective lubrication, help reduce contaminant-related engine wear, and promote dependable generator operation. With three filters in one package, you can stock up for multiple maintenance intervals and keep your backup power system running when you need it most.

Key Features & Benefits of the UGP 0867439 Oil Filter

• UGP aftermarket replacement oil filters – quality construction designed to meet or exceed OEM filtration specifications
• Replaces Generac 070185B, 070185D, and 070185DS – direct-fit replacement for popular Generac oil filter part numbers
• 75mm oil-filter design – precision-engineered for compatible generator engine configurations
• Designed for select air-cooled standby generators – ideal for residential and commercial backup power systems up to 22 kW
• Helps capture contaminants – traps dirt, sludge, and metal particles from circulating engine oil
• Supports effective lubrication and engine protection – reduces wear and extends engine service life
• Convenient three-pack – stock up for multiple maintenance intervals and save time on future oil changes
• Engine oil is not included – pair with manufacturer-recommended oil for optimal performance

Replaces These Generac Part Numbers

The UGP 0867439 Oil Filter is a direct replacement for the following Generac oil-filter part numbers used in compatible applications:

• 070185B
• 070185D
• 070185DS

Whether your original filter is labeled 070185B, 070185D, or 070185DS, this Generac 070185B oil filter 3 pack provides the correct fit and filtration for compatible generator engines.

Compatible Brands & Generator Models

The UGP 0867439 Oil Filter is designed for select generators sold under the following branded lines:

• Generac
• Guardian
• Centurion
• Watchdog
• Dayton
• Siemens
• Carrier

These 75mm aftermarket filters fit select air-cooled standby generators with compatible engine and filter configurations, including specified models up to 22 kW. Compatibility depends on the specific generator model, engine type, and original filter specification. Always verify compatibility using your generator’s complete model number, serial number, engine information, and original oil-filter number before ordering.

UGP 0867439 Oil Filter Specifications

Installation & Maintenance Tips

Proper installation of your UGP 0867439 Oil Filter ensures leak-free operation and maximum engine protection. Follow these steps during your next generator oil change:

1. Remove the old filter using an appropriate filter wrench if necessary. Confirm that the old gasket has been completely removed from the mounting surface.
2. Clean the mounting surface thoroughly to ensure a proper seal with the new filter.
3. Lightly lubricate the new gasket with clean engine oil before threading the new UGP 0867439 Oil Filter into place.
4. Follow the tightening instructions in your generator owner’s manual. Over-tightening can damage the gasket or filter housing.
5. Check for leaks after starting the generator and allow it to reach normal operating temperature.

Replacing your Generac 070185B oil filter at the manufacturer-recommended interval helps maintain reliable standby power and reduces the risk of unexpected generator failure during outages.

Frequently Asked Questions (FAQ)

What Generac part numbers does the UGP 0867439 replace?

The UGP 0867439 Oil Filter replaces Generac part numbers 070185B, 070185D, and 070185DS.

Is the UGP 0867439 an OEM Generac part?

No. The UGP 0867439 Oil Filter is an aftermarket replacement filter manufactured by UGP. It is designed to replace the specified Generac OEM part numbers but is not a genuine Generac-branded component.

How many filters are included in the UGP 0867439 package?

This listing includes three (3) UGP 0867439 Oil Filters, providing enough supply for multiple maintenance intervals.

What generators are compatible with the UGP 0867439 Oil Filter?

These filters are designed for select air-cooled standby generators sold under the Generac, Guardian, Centurion, Watchdog, Dayton, Siemens, and Carrier brands. They fit specified models up to 22 kW with compatible 75mm filter applications. Always verify fitment using your generator model, serial number, and original filter number.

Does the UGP 0867439 Oil Filter package include engine oil?

No. Engine oil is not included. You must purchase the appropriate engine oil separately based on your generator manufacturer’s recommendations.

How often should I replace my generator oil filter?

Refer to your generator owner’s manual for the recommended maintenance schedule. As a best practice, replace the oil filter every time you change the engine oil to ensure maximum lubrication system protection and engine longevity.