Generac 6176 OEM Maintenance Kit for 25–30 kW, 1.5L Generators

Description

Perform routine engine service on a compatible liquid-cooled standby generator with the genuine Generac 6176 Maintenance Kit. Also identified as G006176-0, this kit is designed for select 25 kW and 30 kW generators equipped with 1.5L engines.

The kit includes the filtration, ignition, and service components required for common scheduled-maintenance tasks. Engine oil and coolant are not included and must be purchased separately according to the generator owner’s manual.

Kit Includes:

• 1 genuine Generac air filter
• 1 genuine Generac oil filter
• 4 genuine Generac spark plugs
• 1 oil funnel
• 1 chamois cloth
• 1 service-reminder sticker

Engine oil, coolant, pre-cleaner, tools, and other service supplies are not included. Generac notes that kit contents may vary.

Product Features:

• Genuine Generac OEM maintenance kit
• Designed for select liquid-cooled standby generators
• Compatible with designated 25 kW and 30 kW applications
• Intended for select 1.5L generator engines
• Includes filtration and ignition components
• Provides supplies for common scheduled-maintenance tasks
• Reminder sticker helps record the next service date

Compatible Generator Applications:

• Select Generac 25 kW liquid-cooled standby generators
• Select Generac 30 kW liquid-cooled standby generators
• Select Guardian-series generators with compatible 1.5L engines
• Units that identify G006176-0 or maintenance kit 6176 as the required service kit

Compatibility depends on the generator’s complete model, engine configuration, production date, and serial number.

Part-Number Information:

• Maintenance-kit number: 6176
• Full Generac part number: G006176-0

Product Information:

• Brand: Generac
• Product type: Liquid-cooled generator maintenance kit
• Generator output: Select 25 kW and 30 kW models
• Engine application: Select 1.5L engines
• Spark-plug quantity: 4
• Engine oil included: No
• Coolant included: No
• Listed package weight: Approximately 1 pound
• Listed package dimensions: 8 × 8 × 4 inches
• Condition: New
• Fitment type: Equipment-specific
• Classification: Genuine OEM maintenance components

Maintenance Guidance:

Follow the service schedule and procedures in the generator owner’s manual. Turn off the generator, disable automatic starting, isolate utility and generator power, disconnect the starting battery as directed, and allow the engine to cool before maintenance.

Install the air filter in the correct orientation. Clean the oil-filter mounting surface, confirm that the old gasket has been removed, lightly coat the new filter gasket with clean engine oil, and tighten the filter according to Generac’s instructions.

Check all four spark-plug gaps before installation and tighten the plugs to the specified torque. Add the approved oil and coolant types in the quantities specified for the generator.

After service, run the generator, inspect the oil and cooling systems for leakage, stop the engine, and recheck all fluid levels. Verify the complete model and serial numbers before ordering.