Generac 0J57660SSM OEM Maintenance Kit for 10 kW Generators with 5W-30 Oil

Description

Perform routine engine service on a compatible 10 kW air-cooled standby generator with the Generac 0J57660SSM Maintenance Kit. Designed for select Generac generators, this kit includes filters, spark plugs, 5W-30 synthetic engine oil, and convenient oil-change supplies.

Regular replacement of the engine oil, air filter, oil filter, and spark plugs can help support dependable starting, clean airflow, proper lubrication, and consistent generator operation.

Kit Includes:

• 1 air filter
• 1 oil filter
• 2 spark plugs
• 2 one-quart bottles of 5W-30 synthetic engine oil
• 1 paper oil funnel
• 1 oil wipe
• 1 service-reminder sticker

Additional tools and maintenance supplies are not included unless shown or specified by the seller.

Product Features:

• Maintenance kit for select 10 kW air-cooled standby generators
• Includes filtration, ignition, and oil-change components
• Air filter supports clean engine airflow
• Oil filter helps remove contaminants from circulating oil
• Spark plugs support dependable ignition
• Synthetic oil provides lubrication during scheduled service
• Reminder sticker helps record the next maintenance date

Compatible Generator Models:

0052410, 0052411, 0052419, 0052480, 0052481, 0052520, 0052810, 0052811, 0054730, 0055020, 0055200, 0055201, 0055280, 0056110, 0058260, 0058330, 0058710, 0058711, 0058770, 0058831, 0058920, 0058921, 0058980, 0059140, 0059141, 0059180, 0060510, 0060511.

Compatibility depends on the generator’s complete model, engine, production date, and serial number.

Product Information:

• Brand: Generac
• Kit number: 0J57660SSM
• Product type: Generator maintenance kit
• Generator application: Select 10 kW air-cooled standby generators
• Oil type: 5W-30 synthetic engine oil
• Oil quantity: 2 quarts
• Spark-plug quantity: 2
• Condition: New
• Fitment type: Equipment-specific

Maintenance Guidance:

Follow the service schedule and procedures in the generator owner’s manual. Turn off the generator, disable automatic starting, disconnect the starting battery as directed, and allow the engine to cool before maintenance.

Install the air filter in the correct orientation. Clean the oil-filter mounting surface, lightly coat the new filter gasket with clean engine oil, and tighten the filter according to the manufacturer’s instructions.

Check both spark-plug gaps before installation and tighten the plugs to the specified torque. Add the 5W-30 oil gradually while monitoring the dipstick; do not assume the engine requires all two included quarts.

After service, run the generator, inspect the oil-filter area for leakage, stop the engine, and recheck the oil level. Confirm that 5W-30 is approved for the generator’s operating conditions and verify the complete model and serial numbers before ordering.