Generac 0G9241T Ignition Coil Pack
$33.99
Restore reliable spark and engine operation with the genuine Generac 0G9241T Ignition Coil Pack. Designed for select air-cooled generators equipped with GH410 410cc engines, this OEM ignition-coil assembly replaces Generac 084542, 0D9760, and 0G9241. Verify the generator model, serial number, engine model, and original coil number before ordering.
Description
The Generac 0G9241T Ignition Coil Pack is a genuine OEM replacement ignition-coil assembly for select Generac generators powered by GH410 410cc air-cooled engines.
The ignition coil converts low-voltage electrical energy into the high voltage required to produce a spark at the spark plug. A properly functioning coil supports dependable starting, consistent combustion, and smooth engine operation.
A failing ignition coil may contribute to weak or intermittent spark, difficult starting, misfiring, or an engine that stops after warming up. Because these symptoms can also result from the spark plug, wiring, control system, fuel supply, or low-oil shutdown circuit, the generator should be properly diagnosed before replacing the coil.
Product Features:
• Genuine Generac OEM replacement part
• Ignition-coil assembly with ignition advance
• Designed for select GH410 410cc engines
• Produces the voltage required to fire the spark plug
• Supports dependable starting and consistent engine operation
• Sold individually
• Condition: New
Replacement Part Numbers:
• Generac 084542
• Generac 0D9760
• Generac 0G9241
• Current part number: 0G9241T
Selected Generator Applications:
• Select Generac GP7000 generators
• Select Generac XG6500 generators
• Select Generac XG7000 and XG7000E generators
• Select Generac XG8000 and XG8000E generators
• Select Generac XP6500 generators
• Select Generac XP8000 generators
• Additional generators equipped with compatible GH410 410cc engines
Product Information:
• Manufacturer: Generac
• Brand: Generac
• Part number: 0G9241T
• Product type: Ignition-coil pack
• Engine application: Select GH410 410cc air-cooled engines
• Quantity: 1 ignition-coil assembly
• OEM status: Genuine Generac part
Installation Information:
Disconnect the spark-plug lead and all electrical power before beginning service. The ignition-coil air gap must be set according to the engine service manual during installation. An incorrect air gap can cause poor spark, starting problems, or contact between the coil and flywheel.
Inspect the spark plug, ignition lead, flywheel magnets, wiring, and electrical connections before returning the generator to service. Installation by a qualified small-engine or generator technician is recommended if the ignition system has not been diagnosed.
Generac identifies 0G9241T as the GH410 ignition-coil assembly with advance, and 0G9241 is listed as superseded by this part.
Additional information
| Weight | 1 lbs |
|---|
Reviews
There are no reviews yet.