Generac 0G68200SRV Oil Pressure Switch, 1/4-Inch NPTF, Normally Closed, 12V, 20A

Description

The Generac 0G68200SRV Oil Pressure Switch monitors engine oil pressure and supports the generator’s low-oil-pressure protection system. Designed for select Generac generator applications, this replacement switch features a normally closed electrical configuration, a 1/4-inch NPTF threaded connection, and a 12V, 20A electrical rating. Confirm your generator’s exact requirements before purchasing to help ensure the correct replacement part.

Generac 0G68200SRV Oil Pressure Switch Specifications

The Generac 0G68200SRV is designed to work with compatible generator engines as part of their oil-pressure monitoring system. Its electrical configuration changes state when the specified oil pressure is reached, allowing the generator’s control system to monitor operating conditions.

Review the following specifications before ordering:

• Brand: Generac
• Part number: 0G68200SRV
• Product type: Oil pressure switch
• Thread connection: 1/4-inch NPTF
• Switch configuration: Normally closed
• Electrical rating: 12V, 20A
• Application: Select compatible Generac generators
• Primary function: Supports oil-pressure monitoring and low-oil-pressure engine protection

Always compare these specifications with the requirements listed in your generator’s service documentation.

How the Generac 0G68200SRV Oil Pressure Switch Works

Engine oil pressure is an important operating condition in a generator. The oil pressure switch helps the generator’s control system monitor this condition and supports its low-oil-pressure protection system.

The normally closed electrical configuration changes state when the specified oil pressure is reached. This signal allows the control system to monitor engine operating conditions according to the generator’s design.

Replacing a faulty or unsuitable switch with the correct specified part can help maintain the intended oil-pressure monitoring function. However, the switch alone does not guarantee engine protection. Correct installation, proper operation of the associated control system, and compliance with the generator manufacturer’s maintenance instructions are also important.

1/4-Inch NPTF Connection and Electrical Rating

The Generac 0G68200SRV Oil Pressure Switch features a 1/4-inch NPTF threaded connection for installation in compatible applications. Before installation, verify that the thread specification matches the connection required by your generator engine.

The switch has a 12V, 20A electrical rating and a normally closed configuration. These specifications should match the requirements of the original component and the generator’s electrical system.

Check the following details before placing your order:

• Confirm that the required replacement part number is 0G68200SRV.
• Check the 1/4-inch NPTF thread connection.
• Verify the normally closed switch configuration.
• Confirm the 12V, 20A electrical rating.
• Check compatibility with your generator’s make, model, and serial number.

Do not rely on appearance alone when selecting a replacement oil pressure switch. Similar-looking components may have different electrical ratings, thread specifications, or operating characteristics.

Benefits of the Generac Replacement Oil Pressure Switch

Choosing the correct replacement part helps maintain compatibility with the generator’s specified oil-pressure monitoring system.

Key product features include:

• Specified replacement part: Identified by Generac part number 0G68200SRV.
• Threaded connection: Uses a 1/4-inch NPTF connection for compatible installations.
• Normally closed configuration: Provides the specified electrical switching arrangement.
• 12V, 20A rating: Identifies the stated electrical specifications for compatibility checks.
• Oil-pressure monitoring support: Helps the generator control system monitor engine oil-pressure conditions.
• Select generator applications: Intended for compatible Generac generator models, subject to verification.

These features make accurate part-number and specification checks important when servicing a generator.

Installation and Safety Precautions

Installation should be completed with the generator turned off, cooled, and protected against automatic startup. Follow the generator manufacturer’s service manual for the correct installation and testing procedures.

Before replacing the switch:

1. Confirm that the generator is shut down and has cooled sufficiently.
2. Protect against automatic startup according to the manufacturer’s instructions.
3. Consult the service manual for the specified switch location, removal procedure, and installation requirements.
4. Verify the replacement part number, thread size, electrical rating, and switch configuration.
5. Follow the manufacturer’s testing instructions after installation.

If you are unfamiliar with generator electrical systems or engine service procedures, have a qualified technician perform the work. Never bypass the low-oil-pressure protection system to compensate for a faulty switch or an unresolved engine problem.

Check Generac 0G68200SRV Compatibility Before Ordering

The Generac 0G68200SRV Oil Pressure Switch is suitable for select Generac generator applications, but compatibility should not be assumed for every generator.

Before ordering, locate your generator’s model number and serial number. Compare these details with the applicable parts documentation or consult an authorized Generac parts supplier. Also verify the required replacement part number, connection type, electrical rating, and switch configuration.

If your existing component carries a different part number, confirm whether 0G68200SRV is an approved replacement before purchasing. This extra check helps reduce the risk of ordering an incompatible component and prevents avoidable installation delays.

Frequently Asked Questions

1. What does the Generac 0G68200SRV Oil Pressure Switch do?

The switch monitors engine oil pressure and supports the generator’s low-oil-pressure protection system. Its normally closed electrical configuration changes state when the specified oil pressure is reached, allowing the control system to monitor operating conditions.

2. What are the specifications of the 0G68200SRV oil pressure switch?

The listed specifications are a 1/4-inch NPTF threaded connection, a normally closed switch configuration, and a 12V, 20A electrical rating. Verify these specifications against your generator’s service documentation before ordering.

3. How can I check whether this switch fits my Generac generator?

Check your generator’s make, model number, and serial number against the applicable parts documentation. Confirm that the required part number is 0G68200SRV and that the thread connection, electrical rating, and switch configuration match your application.

Order the Generac 0G68200SRV Oil Pressure Switch

Choose the Generac 0G68200SRV Oil Pressure Switch when it matches the requirements of your generator. Review the part number and technical specifications carefully, and verify compatibility using your generator’s model and serial numbers before ordering.

For installation and testing, always follow the generator manufacturer’s service manual and safety instructions.